|
|
Year(s): All
Model/Type: Any
Bentley Page(s): n/a
From: John Meeks
Symptom(s): Bugs in your too hot van
Materials:
1/2" Magnetic strip with one sticky side. Got mine from a fabric place.
couple of yards of NYLON screen
Hot Glue or acrylic caulk
This is easy... lay out the magnetic tape, sticky side out, around the window.
Cut to fit. It's easiest to ignore the wing, just run it down the wing post.
Cut screen a couple of inches larger than needed to cover the window.
Peel paper backing off the magnetic strip.
Carefully press the screen onto the strip. The sticky strip will hold it.
Hot glue or caulk all around, and let it dry. Hot glue is much faster.
Trim off the excess screen.
Head out to the swamp for a test camp!
Screen stores flat over the engine lid.
See Comments on this entry (F.W.I.W.)
|
|
Free in the Android Market, the Vanagon Rescue Squad app for Android
phones. Scan the QR or search the
Market for Vanagon.
|
|
